View T370HW01V2_4263921.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

? co p y r i gh t au opt r o nics, i nc. m ar c h, 2 0 0 4 all r i g h ts rese r v ed. t 3 7 0 h w01 v . 2 v er0. 0 0/2 5 n o re p r o d u cti o n an d redist r ib u ti o n all o wed produ c t des c ription: t 370h w 01_v2 t f t -lcd p anel auo model na m e: t 3 70h w 01_v2 customer p a rt no/project n a me : customer signature d a te auo date pdf created w ith fineprint pd f factor y pro trial v ersion http://www.fineprint.com www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. march, 2004 all rights reserved. t370hw01 v.2 ver0.0 1/25 no reproduction and redistribution allowed product specifications 37.0 hdtv color tft-lcd module model name: t370hw01 v.2 ( ) preliminary specifications (* ) final specifications note: this specification is subject to change without notice. pdf created with fineprint pdffactory pro trial version http://www.fineprint.com www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. march, 2004 all rights reserved. t370hw01 v.2 ver0.0 2/25 no reproduction and redistribution allowed contents interface connections 3-2 color input data refernece 3-5 precautions 9 packing 8 emc 7-2 cover contents record of revisions general description 1 absolute maximum ratings 2 electrical specifications 3 electrical charactreistics 3-1 input timing specifications 3-3 signal timing waveforms 3-4 power sequence 3-6 optical sfecifications 4 mechanical characteristics 5 reliablity 6 international standards 7 safety 7-1 item no pdf created with fineprint pdffactory pro trial version http://www.fineprint.com www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. march, 2004 all rights reserved. t370hw01 v.2 ver0.0 3/25 no reproduction and redistribution allowed record of revision version date no description remark 0.0 jul. 11, 05 first draft 0.1 jan. 01, 06 add p.23 packing info pdf created with fineprint pdffactory pro trial version http://www.fineprint.com www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. march, 2004 all rights reserved. t370hw01 v.2 ver0.0 4/25 no reproduction and redistribution allowed 1. general description this specification applies to the 37.0 inch color tft-lcd module t370hw01 v2. this lcd module has a tft active matrix type liquid crystal panel 1920x1080 pixels, and diagonal size of 37.0 inch. this module supports 1920x1080 hdtv mode (non-interlace). each pixel is divided into red, green and blue sub-pixels or dots which are arranged in vertical stripes. gray scale or the brightness of the sub-pixel color is determined with a 8-bit gray scale signal for each dot. the t370hw01 v2 has been designed to apply the 8-bit 2 channel lvds interface method. it is intended to support displays where high brightness, wide viewing angle, high color saturation, and high color depth are very important. * general information items specification unit note active screen size 37.01 inches display area 819.36 (h) x 460.89(v) mm outline dimension 894.8(h) x 527.4(v) x 50.72(d) mm with inverter driver element a-si tft active matrix display colors 16.7m colors number of pixels 1920 x 1080 pixel pixel arrangement rgb vertical stripe pixel pitch 0.42675(h) x 0.42675(w) surface treatment hard-coating (3h), anti-glare, pdf created with fineprint pdffactory pro trial version http://www.fineprint.com www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. march, 2004 all rights reserved. t370hw01 v.2 ver0.0 5/25 no reproduction and redistribution allowed 2. absolute maximum ratings the following are maximum values which, if exceeded, may cause faulty operation or damage to the unit. parameter symbol min. max. unit note logic/lcd driving voltage v dd -0.3 14 v. 1 input voltage of signal vin -0.3 4 v. 1 blu input voltage v ddb -0.3 27 v 1 blu control voltage bl on -0.3 7.0 v 1 operating temperature t op 0 50 2 storage temperature h st -20 60 2 operating ambient humidity h op 10 90 %rh 2 storage humidity h st 10 90 %rh 2 note 1 : duration = 50msec note 2 : maximum wet-bulb should be 39 and no condensation. the relative humidity must not exceed 90% non-condensing at temperatures of 40 or less. at temperatures greater than 40 , the wet bulb temperature must not exceed 39 . pdf created with fineprint pdffactory pro trial version http://www.fineprint.com www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. march, 2004 all rights reserved. t370hw01 v.2 ver0.0 6/25 no reproduction and redistribution allowed 3. electrical specification 3-1 electrical characteristics the t370hw01 requires two power inputs. one is employed to power the lcd electronics and to drive the tft array and liquid crystal. the second input which powers the ccfl, is typically generated by an inverter. values parameter symbol min typ max unit notes lcd: power supply input voltage v lcd 10.80 12.0 13.20 vdc power supply input current i lcd - 1.0 1.2 a 1 power consumption p c - 12.0 14.4 watt 1 inrush current i rush - 3 a backlight power consumption 140 watt 2 life time 60,000 3 note: 1. the specified current and power consumption are under the vcc=12.0v, 25 , fv= 60hz, fclk=65mhz condition whereas mosaic pattern (8x6) is displayed and fv is the frame frequency. 2. the lamp power consumption shown above does include loss of external inverter at 25 . the used lamp current is the lamp typical current 3. the life is determined as the time at which luminance of the lamp is 50% compared to that of initial value at the typical lamp current on condition of continuous operating at 25 2 pdf created with fineprint pdffactory pro trial version http://www.fineprint.com www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. march, 2004 all rights reserved. t370hw01 v.2 ver0.0 7/25 no reproduction and redistribution allowed 3-2 interface connections lcd connector (cn1): fi-we41p-hf(jae) or equivalent lvds transmitter: pin # spec name description / reserve function 21 rxe1- negative lvds data input (even data) 1 power 12v power input 22 rxe0+ positive lvds data input (even data) 2 power 12v power input 23 rxe0- negative lvds data input (even data) 3 power 12v power input 24 gnd power ground 4 power 12v power input 25 nc no connecting pin* 5 gnd power ground 26 nc no connecting pin* 6 gnd power ground 27 rxo3+ positive lvds data input (odd data) 7 gnd power ground 28 rxo3- negative lvds data input (odd data) 8 nc no connecting pin* 29 rxoc+ positive lvds clock input (odd clock) 9 nc no connecting pin* 30 rxoc- negative lvds clock input (odd clock) 10 gnd power ground 31 gnd power ground 11 nc no connecting pin* 32 rxo2+ positive lvds data input (odd data, hs, vs, de) 12 nc no connecting pin* 33 rxo2- negative lvds data input (odd data, hs, vs, de) 13 rxe3+ positive lvds data input (even data) 34 rxo1+ positive lvds data input (odd data) 14 rxe3- negative lvds data input (even data) 35 rxo1- negative lvds data input (odd data) 15 rxec+ positive lvds clock input (even clock) 36 rxo0+ positive lvds data input (odd data) 16 rxec- negative lvds clock input (even clock) 37 rxo0- negative lvds data input (odd data) 17 gnd power ground 38 gnd power ground 18 rxe2+ positive lvds data input (even data) 39 nc no connecting pin* 19 rxe2- negative lvds data input (even data) 40 nc no connecting pin* 20 rxe1+ positive lvds data input (even data) 41 nc no connecting pin* *nc only C pull high or low is not allowed note: all gnd (ground) pins should be connected together and also be connected to the lcd s metal frame. all vcc (power input) pins should be connected together. pdf created with fineprint pdffactory pro trial version http://www.fineprint.com www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. march, 2004 all rights reserved. t370hw01 v.2 ver0.0 8/25 no reproduction and redistribution allowed l lvds order orxclk+ or0og0 orxclk- orx0 orx1 orx2 orx3 or5or4or3or2or1or0og0 og1ob1ob0og5og4og3og2og1ob1 ob2devshsob5ob4ob3ob2 or6ob7ob6og7og6or7or6 erxclk+ erxclk- erx0 erx1 erx2 erx3 er0eg0er5er4er3er2er1er0eg0 eg1eb1eb0eg5eg4eg3eg2eg1eb1 eb2eb5eb4eb3eb2de er6eb7eb6eg7eg6er7eg6 rxoc+ rxoc- rxoc- rxo0 rxo1 rxo2 rxo3 rxec+ rxec- rxe0 rxe1 rxe 2 rxe3 pdf created with fineprint pdffactory pro trial version http://www.fineprint.com www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. march, 2004 all rights reserved. t370hw01 v.2 ver0.0 9/25 no reproduction and redistribution allowed l backlight connector pin configuration - 1. electrical specification ta=25 5 no item symbol test condition min typ max unit note 1 input voltage v bl 21.6 24 26.4 v 2 input current i bl v bl =24v, dimmax - 5.83- 6.71 a 3 input power p bl v bl =24v, dimmax - 140- 161 w 4 inrush current i rush v bl =24v, dimmax - 7 a 5 oscillating frequency fo v bl =24v, dimmax 42 khz on blon v bl =24v 2 - 5 v 6 on/off control voltage off blon v bl =24v 0 - 0.8 v max vdim v bl =24v - 0 - v 7 analog dimming control *1 min vdim v bl =24v 4.75 5 5.25 v 50% luminance max vdim v bl =24v - 100 - % 8 pwm dimming control * 2 min vdim v bl =24v - 30 - % duty ratio 9 dimming frequency f d v bl =24v 150 - 300 hz 1: blon logic h(5v) : back light on l (0v) : back light off open : back light off 2bright control by the voltage 5.0v : min. brightness 0v : max. brightness pdf created with fineprint pdffactory pro trial version http://www.fineprint.com www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. march, 2004 all rights reserved. t370hw01 v.2 ver0.0 10/25 no reproduction and redistribution allowed 2. input specification cn1 : s14b-ph-sm3-tb(jst) no signal name feature 1 v bl +24v 2 v bl +24v 3 v bl +24v 4 v bl +24v 5 v bl +24v 6 gnd gnd 7 gnd gnd 8 gnd gnd 9 gnd gnd 10 gnd gnd 11 vdim brightness control signal input (0v : max ~ 5.0v :min ) 12 bl on/off 5v : on, 0v : off 13 e-pwm dim external pwm dimming control 14 sel pin high(2~5v) : internal pwm (pin 11) low(0~0.8) : external pwm (pin13) cn2 : s10b-ph-sm3-tb(jst) no signal name feature 1 v bl +24v 2 v bl +24v 3 v bl +24v 4 v bl +24v 5 v bl +24v 6 gnd gnd 7 gnd gnd 8 gnd gnd 9 gnd gnd 10 gnd gnd * 1 pwm sel setting pin setting pin 14 : high pin 14 : low v dim (pin 11) internal pwm dimming analog dimming e-pwm (pin13) disable external pwm dimming pdf created with fineprint pdffactory pro trial version http://www.fineprint.com www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. march, 2004 all rights reserved. t370hw01 v.2 ver0.0 11/25 no reproduction and redistribution allowed 3-3 input timing specifications this is the signal timing required at the input of the user connector. all of the interface signal timing should be satisfied with the following specifications for it s proper operation. l timing table (de only node) signal item symbol min. typ. max. unit vertical period tv 1090 1 106 1 585 th section active tdisp(v) 1080 1080 1080 th blanking tblk(v) 10 26 505 th horizontal period th 1025 1 356 1 491 tclk section active tdisp(h) 960 960 960 tclk blanking tblk(h) 65 396 531 tclk period tclk ns clock freqency freq 68 75 78 mhz vertical frequency freq. 48 50 52 hz horizontal frequency freq. 65 67.8 72 khz a. frame rate = 60 hz signal item symbol min. typ. max. unit period tv 1090 1130 1200 th active tdisp(v) 1080 1080 1080 th vertical section blanking tblk(v) 10 50 120 th period th 1025 1100 1180 tclk active tdisp(h) 960 960 960 tclk horizontal section blanking tblk(h) 65 140 220 tclk period tclk ns clock freqency freq 68 74.58 82 mhz vertical frequency freq. 58 60 62 hz horizontal frequency freq. 65 67.8 72 khz b. frame rate = 50 hz pdf created with fineprint pdffactory pro trial version http://www.fineprint.com www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. march, 2004 all rights reserved. t370hw01 v.2 ver0.0 12/25 no reproduction and redistribution allowed 3-4 signal timing waveforms t h t d i s p ( v ) t b l k ( v ) t v d e r g b d a t a n l i n e i n v a l i d d a t a i n v a l i d d a t a 1 l i n e 2 l i n e 3 l i n e n l i n e 4 l i n e t c l k c l k d e r g b d a t a ( o d d ) r g b d a t a ( e v e n ) p i x e l m - 7 p i x e l m - 5 p i x e l m - 3 p i x e l m - 1 p i x e l m - 6 p i x e l m - 4 p i x e l m - 2 p i x e l m i n v a l i d d a t a i n v a l i d d a t a p i x e l 1 p i x e l 2 p i x e l 3 p i x e l 5 p i x e l 4 p i x e l 6 p i x e l 7 p i x e l 8 p i x e l 9 p i x e l 1 0 p i x e l 1 1 p i x e l 1 2 p i x e l m - 5 p i x e l m - 3 p i x e l m - 1 p i x e l m - 4 p i x e l m - 2 p i x e l m i n v a l i d d a t a i n v a l i d d a t a p i x e l 1 p i x e l 2 p i x e l 3 p i x e l 4 t h t d i s p ( h ) t b l k ( h ) pdf created with fineprint pdffactory pro trial version http://www.fineprint.com www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. march, 2004 all rights reserved. t370hw01 v.2 ver0.0 13/25 no reproduction and redistribution allowed 3-5 color input data reference the brightness of each primary color (red, green and blue) is based on the 8 bit gray scale data input for the color; the higher the binary input, the brighter the color. the table below provides a reference for color versus data input. color data reference input color data red msb lsb green msb lsb blue msb lsb color r7 r6 r5 r4 r3 r2 r1 r0 g7 g6 g5 g4 g3 g2 g1 g0 b7 b6 b5 b4 b3 b2 b1 b0 black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 red(255) 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 green(255) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 blue(255) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 cyan 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 magenta 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 yellow 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 basic color white 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 red(000) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 red(001) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ---- red(254) 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 red red(255) 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 green(000) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 green(001) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 ---- green(254) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 green green(255) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 blue(000) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blue(001) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 ------- blue(254) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 blue blue(255) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 pdf created with fineprint pdffactory pro trial version http://www.fineprint.com www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. march, 2004 all rights reserved. t370hw01 v.2 ver0.0 14/25 no reproduction and redistribution allowed 3-6 power sequence 10% 90% 90% 10% t1t2 t3t4 t5t6t7 lamp on valid data power supply for lcd signal backlight values parameter min. typ. max. units t1 470 - 1000 us t2 20 - 35 ms t3 200 - - ms t4 200 - - ms t5 5 - - ms t6 - 30 ms t7 1 - - s note: user should follow the power on/off sequence and the rising/falling time to avoid miss operation of the panel. pdf created with fineprint pdffactory pro trial version http://www.fineprint.com www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. march, 2004 all rights reserved. t370hw01 v.2 ver0.0 15/25 no reproduction and redistribution allowed 4. optical specification optical characteristics are determined after the unit has been on and stable for approximately 30 minutes in a dark environment at 25 . the values specified are at an approximate distance 50cm from the lcd surface at a viewing angle of and equal to 0 . fig.1 1 presents additional information concerning the measurement equipment and method. values parameter symbol min. typ. max. units notes contrast ratio cr 1000 1 surface luminance, white lwh 450 550 cd/ O 2 luminance variation white 9 p 1.3 3 gray to gray 8 tr 15 response time tf 6 ms red r x 0.640 r y 0.330 green g x 0.290 g y 0.600 blue b x 0.150 b y 0.060 white w x 0.280 color chromaticity w y typ C 0.03 0.290 typ +0.03 viewing angle x axis, right( =0 ) r 85 88 degree 5 x axis, left( =180 ) l 85 88 y axis, up( =90 ) u 85 88 y axis, down ( =0 ) d 85 88 pdf created with fineprint pdffactory pro trial version http://www.fineprint.com www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. march, 2004 all rights reserved. t370hw01 v.2 ver0.0 16/25 no reproduction and redistribution allowed note: 1. contrast ratio (cr) is defined mathematically as: surface luminance with all white pixels contrast ratio= surface luminance with all black pixels 2. surface luminance is luminance value at point 1 across the lcd surface 50cm from the surface with all pixels displaying white. from more information see fig 2. 3. the variation in surface luminance, white is defined (center of screen) as: white(5p) =maximum(l on1 , l on2 , ,l on9 )/minimum(l on1 , l on2 , l on9 ) more information pls see fig.3 4. response time is the time required for the display to transition from white to black (rise time, tr r ) and from black to white (decay time, tr d ). for additional information see fig4. 5. viewing angle is the angle at which the contrast ratio is greater than 10. the angles are determined for the horizontal or x axis and the vertical or y axis with respect to the z axis which is normal to the lcd surface. for more information see fig5. fig. 2 luminance fig. 3 luminance variation 1 2 3 4 5 6 7 8 9 h v h/6 h/2 v/2 v/6 h v h/2 v/2 pdf created with fineprint pdffactory pro trial version http://www.fineprint.com www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. march, 2004 all rights reserved. t370hw01 v.2 ver0.0 17/25 no reproduction and redistribution allowed fig.4 response time the response time is defined as the following figure and shall be measured by switching the input signal for black and white . 90% 100% 10% 0% whitewhite black trtd fig.4 viewing angle pdf created with fineprint pdffactory pro trial version http://www.fineprint.com www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. march, 2004 all rights reserved. t370hw01 v.2 ver0.0 18/25 no reproduction and redistribution allowed 5. mechanical characteristics the contents provide general mechanical characteristics for the model t460hw01. in addition the figures in the next page are detailed mechanical drawing of the lcd. horizontal 894.8 mm vertical 527.4 mm outline dimension depth 50.7 mm(with inverter) horizontal 827.8 mm bezel opening area vertical 470.8 mm horizontal 819.36 mm display active area vertical 460.89 mm weight 11000g (typ.) surface treatment hard-coating (3h), anti-glare pdf created with fineprint pdffactory pro trial version http://www.fineprint.com www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. march, 2004 all rights reserved. t370hw01 v.2 ver0.0 19/25 no reproduction and redistribution allowed 2-d drawing pdf created with fineprint pdffactory pro trial version http://www.fineprint.com www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. march, 2004 all rights reserved. t370hw01 v.2 ver0.0 20/25 no reproduction and redistribution allowed 6. reliability environment test condition no test item condition 1 high temperature storage test ta=60 240h 2 low temperature storage test ta= -20 240h 3 high temperature operation test ta=50 50%rh 240h 4 low temperature operation test ta=0 240h 5 vibration test (non-operating) wave form: random vibration level: 1.5g rms bandwidth: 10-500hz, duration: x, y, z 20min one time each direction 6 shock test (non-operating) shock level: 50g waveform: half since wave, 11ms direction: x, y, z one time each direction 7 vibration test (with carton) wave form: random vibration level: 1.5g rms bandwidth: 10-500hz, duration: x, y, z 30min one time each direction 8 drop test (with carton) height: 53.3cm 1 corner, 3 edges, 6 surfaces (astmd4169-i) result evaluation criteria there should be no change which might affect the practical display function when the display quality test is conducted under normal operating condition. pdf created with fineprint pdffactory pro trial version http://www.fineprint.com www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. march, 2004 all rights reserved. t370hw01 v.2 ver0.0 21/25 no reproduction and redistribution allowed 7. international standard 7-1. safety 1. ul 60950, third edition, underwriters laboratories, inc. dec. 11, 2000. standard for safety of information technology equipment, including electrical business equipment. 2. can/csa c22.2 no. 60950, third edition, canadian standards association, dec. 1, 2000 standard for safety of information technology equipment including electrical business equipment. 3. en60950: 2000, third edition iec 60950:1999, third edition european committee for electrotechnical standardization (cenelec) european standard for safety of information technology equipment including electrical business equipment. 7-2. emc a) ansi c63.4 methods of measurement of radio-noise emissions from low-voltage electrical and electrical equipment in the range of 9khz to 40ghz. american national standards institute (ansi), 1992 b) c.i.s.p.r limits and methods of measurement of radio interface characteristics of information technology equipment. international special committee on radio interference. c) en 55022 limits and methods of measurement of radio interface characteristics of information technology equipment. european committee for electrotechnical standardization. (cenelec), 1998 pdf created with fineprint pdffactory pro trial version http://www.fineprint.com www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. march, 2004 all rights reserved. t370hw01 v.2 ver0.0 22/25 no reproduction and redistribution allowed 8. packing label : 83mm * 23mm carton label :100mm * 120mm carton size 965(l)mm*280(w)mm*662(h)mm pallet size 1130(l)mm*980(w)mm*123(h)mm t370hw01 2 t370hw01 v2 97.37t01.200 pdf created with fineprint pdffactory pro trial version http://www.fineprint.com www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. march, 2004 all rights reserved. t370hw01 v.2 ver0.0 23/25 no reproduction and redistribution allowed 3pcs modules 1pcs module/esd bag cushion top module 3pcs / 1 carton cushion down pdf created with fineprint pdffactory pro trial version http://www.fineprint.com www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. march, 2004 all rights reserved. t370hw01 v.2 ver0.0 24/25 no reproduction and redistribution allowed 9. precautions please pay attention to the followings when you use this tft lcd module. 9-1 mounting precautions (1) you must mount a module using holes arranged in four corners or four sides. (2) you should consider the mounting structure so that uneven force (ex. twisted stress) is not applied to module. and the case on which a module is mounted should have sufficient strength so that external force is not transmitted directly to the module. (3) please attach the surface transparent protective plate to the surface in order to protect the polarizer. transparent pro tective plate should have sufficient strength in order to the resist external force. (4) you should adopt radiation structure to satisfy the temperature specification. (5) acetic acid type and chlorine type materials for the cover case are not desirable because the former generates corrosive gas of attacking the polarizer at high temperature and the latter causes circuit break by electro-chemical reaction. (6) do not touch, push or rub the exposed polarizers with glass, tweezers or anything harder than hb pencil lead. and please do not rub with dust clothes with chemical treatment. do not touch the surface of polarizer for bare hand or greasy cloth. (some cosmetics are detrimental to the polarizer.) (7) when the surface becomes dusty, please wipe gently with absorbent cotton or other soft materials like chamois soaks with petroleum benzene. normal-hexane is recommended for cleaning the adhesives used to attach front/ rear polarizers. do not use acetone, toluene and alcohol because they cause chemical damage to the polarizer. (8) wipe off saliva or water drops as soon as possible. their long time contact with polarizer causes deformations and color fading. (9) do not open the case because inside circuits do not have sufficient strength. 9-2 operating precautions (1) the spike noise causes the mis-operation of circuits. it should be lower than following voltage: v= 200mv(over and under shoot voltage) (2) response time depends on the temperature. (in lower temperature, it becomes longer..) (3) brightness depends on the temperature. (in lower temperature, it becomes lower.) and in lower temperature, response time (required time that brightness is stable after turned on) becomes longer. (4) be careful for condensation at sudden temperature change. condensation makes damage to polarizer or electrical contacted parts. and after fading condensation, smear or spot will occur. (5) when fixed patterns are displayed for a long time, remnant image is likely to occur. (6) module has high frequency circuits. sufficient suppression to the electromagnetic interference shall be done by system manufacturers. grounding and shielding methods may be important to minimize the interface. 9-3 electrostatic discharge control since a module is composed of electronic circuits, it is not strong to electrostatic discharge. make certain that treatment persons are connected to ground through wrist band etc. and don t touch interface pin directly. pdf created with fineprint pdffactory pro trial version http://www.fineprint.com www.datasheet.co.kr datasheet pdf - http://www..net/
? copyright au optronics, inc. march, 2004 all rights reserved. t370hw01 v.2 ver0.0 25/25 no reproduction and redistribution allowed 9-4 precautions for strong light exposure strong light exposure causes degradation of polarizer and color filter. 9-5 storage when storing modules as spares for a long time, the following precautions are necessary. (1) store them in a dark place. do not expose the module to sunlight or fluorescent light. keep the temperature between 5 and 35 at normal humidity. (2) the polarizer surface should not come in contact with any other object. it is recommended that they be stored in the container in which they were shipped. 9-6 handling precautions for protection film (1) the protection film is attached to the bezel with a small masking tape. when the protection film is peeled off, static electricity is generated between the film and polarizer. this should be peeled off slowly and carefully by people who are electrically grounded and with well ion-blown equipment or in such a condition, etc. (2) when the module with protection film attached is stored for a long time, sometimes there remains a very small amount of flue still on the bezel after the protection film is peeled off. 9. you can remove the glue easily. when the glue remains on the bezel or its vestige is recognized, please wipe them off with absorbent cotton waste or other soft material like chamois soaked with normal-hexane. pdf created with fineprint pdffactory pro trial version http://www.fineprint.com www.datasheet.co.kr datasheet pdf - http://www..net/

▲Up To Search▲

Price & Availability of T370HW01V2

	To Download T370HW01V2 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .